Pages: 1 [2] 3 4 5 6 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 9 post(s) |
Necharo Rackham
Side Kicks The-Culture
73
|
Posted - 2017.03.14 15:29:18 -
[31] - Quote
I've seen a completely blank map a few times on one account, while it displayed fine on another account. Re-logging appeared to fix it, but the signatures were then not displayed on that one account but displayed on the other. |
AlleyRat
INDUSTRIAL SURVEY SERVICES INC
0
|
Posted - 2017.03.14 15:40:08 -
[32] - Quote
Since I logged in after the patch, it takes awhile to change ships in the station, undocking/docking takes twice as long and passage through a jump gate is 4x as long. and has become laggy |
Dominous Nolen
V0LTA WE FORM V0LTA
251
|
Posted - 2017.03.14 15:56:27 -
[33] - Quote
Vidork Drako wrote:Sp3ktr3 wrote:Gong 2.0 is actually making it so I can't play the game now. It needs to be changed or disabled asap. Yeah they really try to put that gong somehow .. remember that ? https://www.youtube.com/watch?v=2z-IdhbCkZo So now we have the Gong 2.0 for dscanning.
I think someone else mentioned if you turn of the UI interaction sound you can turn if off.
https://www.youtube.com/watch?v=JblPucmHY0E
@dominousnolen
|
Jagged Palleon
Pandemic Horde Inc. Pandemic Horde
1
|
Posted - 2017.03.14 16:03:44 -
[34] - Quote
CCP Claymore wrote:
The probe sizing was inverted to match the movement of the slider.
But seriously: why? Any explorer was already used to doing those moves the way they were. |
ParkerJ
Dead's Prostitutes Circle-Of-Two
38
|
Posted - 2017.03.14 16:13:18 -
[35] - Quote
To clarify the issue with the market:
Teleport yourself into the Keepstar at 68ft and do the following:
Open up the market window and click on the cog on the right of the seach on below the browse and quickbar tab Set Range Filter to Region
Search for the string "Carrier" then see below image
http://imgur.com/a/EYcFc Shows the Search issue
Using the same Filter for region click on skills expand navigation and click on Evasive Maneuvering Click on the group tab, take note of the skillbook Evasive Maneuvering and how it is listed as the cheapest 5 jumps away, however it is not! Click on the details tab. See first and second image.
http://imgur.com/a/x0seO http://imgur.com/a/6mUI1 Shows the Market group issue
You can see the issue in its simplicity:
Open up the market window and click on the cog on the right of the seach on below the browse and quickbar tab Set Range Filter to Region
Expand Skills
Now go back and set it to Station. Did you see the Groups Populate in the List view?
Citadels are not listing thier items correctly. As Devs please just tell me if you can reproduce this or not if not Ill log a ticket and accept that my install is buggered.
|
Loroseco Kross
Hard Knocks Inc. Hard Knocks Citizens
44
|
Posted - 2017.03.14 16:23:33 -
[36] - Quote
Whippy Whip wrote:dscan windows appears to always be in focus, using number keys for anything always changes the the filters
please remove the stupid hotkkeys 1-0 on dscan, they are useless and now bugged
I'll second this. It's especially annoying since many pilots, myself included, have remapped their highslot modules to the keys 1-8. Every time I cycle my guns my dscan and probe scan filters both change.
I'm an acquired taste.
|
Thanatos Marathon
Justified Chaos Spaceship Bebop
644
|
Posted - 2017.03.14 16:37:18 -
[37] - Quote
The old dscan window appears to be restricted to current grid for range (slider moves it just doesn't return any results from off grid)
On some accounts getting the following error:
Error Cannot copy files for Tranquility while clients are running.
Had a friend who logged out and rebooted to try it then he couldn't log any of his accounts in for about a hour and then they started working.
JUSTK is recruiting
|
Vidork Drako
EVE University Ivy League
7
|
Posted - 2017.03.14 16:41:52 -
[38] - Quote
It happend when you log in everytime. the anomalies show up on scanning windows even if unchecked. You have to check / uncheck anomalies to make them dissapear. |
Warlogy
The Mjolnir Bloc The Bloc
0
|
Posted - 2017.03.14 16:42:05 -
[39] - Quote
Loroseco Kross wrote:Whippy Whip wrote:dscan windows appears to always be in focus, using number keys for anything always changes the the filters
please remove the stupid hotkkeys 1-0 on dscan, they are useless and now bugged I'll second this. It's especially annoying since many pilots, myself included, have remapped their highslot modules to the keys 1-8. Every time I cycle my guns my dscan and probe scan filters both change.
Yes please make an option for this ASAP |
Yuri Titov
EVE University Ivy League
0
|
Posted - 2017.03.14 17:33:47 -
[40] - Quote
CCP Claymore wrote:The probe sizing was inverted to match the movement of the slider.
This change is so counter intuitive and annoying - can we at least have an option to change it?
Also this, moving analyze button to the bottom of the window... results in this: http://i.imgur.com/DUTfaw6.png
Same goes for d-scan 'scan' button....
http://i.imgur.com/882n8EZ.png
just... why??
|
|
Simply Simon
V.I.C.E.
0
|
Posted - 2017.03.14 17:45:24 -
[41] - Quote
Naraish Adarn wrote:Please adjust color balance in the probe view to be more color blind friendly. Previous was OK despite its rather obnoxious brightness now the brightness is fine the colors are not. I too am color blind. It's making it so I can't probe scan due to not being able to locate what I'm scanning for. Sorry, it's hard to explain, but can't see things well enough to be able to scan properly. |
Jethro T
Woopatang Primary.
1
|
Posted - 2017.03.14 17:45:42 -
[42] - Quote
How do I get the old (pre patch) scanning window back. It actually worked. New system...BLOWS! |
Chris Corsten
Scandium Defense and Security Inc. Dark - Alliance
0
|
Posted - 2017.03.14 18:06:22 -
[43] - Quote
Issue 1: D-Scan won't open with Shortcut "V" anymore. Well, it isn't really an Issue, but why would you change that ? If there's a Reason im ok with that, but i don't see one at the Moment. I always used "V", so that D-Scan opens up and does an instant scan. Now i need to hit Alt + D (Preferences -> Window -> Directional Scan) to open the D-Scan itself, and then hit "V" (Preferences -> Combat -> Directional Scan) to do continuous scans.
Issue 2: If i am Combat Scanning, and there are, lets say, 300 Objects on my Probe Scanner, moving the Probes in that Windows lags like hell, Combat Scanning is now completely a nightmare. This Issue leads to Issue 3.
Issue 3: First Probe Scan done, 15 Signatures on D-Scan. Ok, lets focus on one Signature, and scan that. Ooops, focussing a Signature by klicking on it in the Scan Window itself, doesn't hide all the others signatures anymore. Yeah, my complete Overview of the Probe Scanner is gone. Combined with Combat Scanning, and that lag when moving the drones, the experience of scanning boosts to a complete new Level :D
If i missed something about that Issues, or that Issues I experience are due to that i don't know how to use the new D-Scan properly, I'm happy if someone could help me out :)
best reagrds Chris |
Vidork Drako
EVE University Ivy League
7
|
Posted - 2017.03.14 18:13:20 -
[44] - Quote
Chris Corsten wrote:Issue 1: D-Scan won't open with Shortcut "V" anymore. Well, it isn't really an Issue, but why would you change that ? If there's a Reason im ok with that, but i don't see one at the Moment. I always used "V", so that D-Scan opens up and does an instant scan. Now i need to hit Alt + D (Preferences -> Window -> Directional Scan) to open the D-Scan itself, and then hit "V" (Preferences -> Combat -> Directional Scan) to do continuous scans.
Issue 2: If i am Combat Scanning, and there are, lets say, 300 Objects on my Probe Scanner, moving the Probes in that Windows lags like hell, Combat Scanning is now completely a nightmare. This Issue leads to Issue 3.
Issue 3: First Probe Scan done, 15 Signatures on D-Scan. Ok, lets focus on one Signature, and scan that. Ooops, focussing a Signature by klicking on it in the Scan Window itself, doesn't hide all the others signatures anymore. Yeah, my complete Overview of the Probe Scanner is gone. Combined with Combat Scanning, and that lag when moving the drones, the experience of scanning boosts to a complete new Level :D
If i missed something about that Issues, or that Issues I experience are due to that i don't know how to use the new D-Scan properly, I'm happy if someone could help me out :)
best reagrds Chris
A big +1 especially about combat scanning fleet situation (ty didnt even think about that)
|
Chris Corsten
Scandium Defense and Security Inc. Dark - Alliance
0
|
Posted - 2017.03.14 18:22:45 -
[45] - Quote
Issue 4: If the D-Scan and the Probe Scanner are integrated in the Map, and the Map is Docked to the left Side, centering on current position doesn't work properly. Hard do describe, but lets say the Map is 50 wide, and the D-Scan and probe scanner are 15 wide. So if i center on current position, the start Point of centering is correct, 15 Units away from left border, because there are the scanner windows, but the window in wich my point is still 50 wide, so the center point is a bit off to the right (the last 15 Units i dont see on the Map, because the Map ignores the 15 left Units of the D-Scan and Probe scanner.
Width of Map, in wich the point is centered should be => Max width of Map - Width of D-Scan/Probe Scanner Now it is only Max width of map
best regards Chris |
Dunar Dolorgiet
EVE University Ivy League
0
|
Posted - 2017.03.14 18:34:16 -
[46] - Quote
Issue: New map window center pivot offset is effected by "Camera Center" setting.
When using multiple screens the "Camera Center" setting found in "Display & Graphics" -> "Camera Settings" is useful to move the default view pivot into a more convenient location. The new map window view pivot is also modified by this setting even if the map is in floating mode. This results in an off-center pivot impairs the usability and wastes screen real estate.
|
Grookshank
Jump Drive Appreciation Society Jump Drive Appreciation Alliance
130
|
Posted - 2017.03.14 18:54:00 -
[47] - Quote
Whippy Whip wrote:dscan windows appears to always be in focus, using number keys for anything always changes the the filters
please remove the stupid hotkkeys 1-0 on dscan, they are useless and now bugged No, do not remove them! They are the fastest way to refrech anomalies. Just make it so that the only work if the window has focus like before. |
Sp3ktr3
Unicorn Rampage
39
|
Posted - 2017.03.14 19:22:08 -
[48] - Quote
The LOD system seems to be really messed up. The lighting goes screwball on ships if you zoom out a little. It looks like the lighting switches to the opposite side of the ship, or the ship just turns really dark. I submitted a bug report already but I thought I would post it here as well. I noticed some weird things before the patch but I think it's worse now. |
Naraish Adarn
Alexylva Paradox
148
|
Posted - 2017.03.14 19:32:23 -
[49] - Quote
Simply Simon wrote:Naraish Adarn wrote:Please adjust color balance in the probe view to be more color blind friendly. Previous was OK despite its rather obnoxious brightness now the brightness is fine the colors are not. I too am color blind. It's making it so I can't probe scan due to not being able to locate what I'm scanning for. Sorry, it's hard to explain, but can't see things well enough to be able to scan properly.
i got the idea what you mean i have to play "spot the difference" by moving my client window between my two monitors which have slightly different color balance due to age difference order to find a single signature on the view.
as a wormhole resident who's supposed to scan on regular basis doing it on single signature is infuriating doing it on 10-15 signatures makes me want to abandon my primarily pacifist tendencies in real life. |
Valleriani
TriFlexure
19
|
Posted - 2017.03.14 19:34:35 -
[50] - Quote
Old dscan window is showing nothing, even with no overview preset.
'No Scan Resutls'. I am in a WH atm, there is defo things around. New Dscan works but guys you do realize in wormholes you gotta keep the dscan window open, its so HUGE now I can't just put it off to the side.
Please make a way for the map window and the dscan window seperate or at least minimize the map size somehow. We need the room in WH space. |
|
Arias Seven Seven
Four Mouseketeers
1
|
Posted - 2017.03.14 19:42:26 -
[51] - Quote
I always love it when a patch needs patching or is so bad it just screws a whole game up. Congrats Devs. I say this not based soley on comments above, but also because I can't see anything but black on my screen whether in station or out. Yep, flying blind means unable to play the game. Nice patch. |
Lara Agnon
Federal Navy Academy Gallente Federation
3
|
Posted - 2017.03.14 20:05:48 -
[52] - Quote
on two different orca pilots, ice harvesting drones do not mine repeatedly any more. after 1-7 cycles drones get lazy and stop working |
Lara Agnon
Federal Navy Academy Gallente Federation
3
|
Posted - 2017.03.14 20:26:44 -
[53] - Quote
changing dscan filters is extremely slow. in my current system i have about 500 objects and changing a filter makes my pc unresponsive for about 20 seconds |
Erasmus Ronuken
Metacrania Vanguard of the Phoenix
2
|
Posted - 2017.03.14 20:36:48 -
[54] - Quote
CCPlease ,
I know you are trying to be innovative and try cool things to keep the new kids happy, but please just explain to us why the Dscan/Probe Scanner options of Angle, Radius and Scan/Analyze are at the bottom of the Window below the list? And then to jam it all into one Massive window to soak up more Screan Real estate just seems so damn impractical. I trust I am not the only one with this query I mean you want to change from the Probe Scanner/ Dscan and change the angle/radius for each immediatly. But thank you very much for the option to separate the Dscan and Probe launcher windows though, and even better, to use the old probe scanner.
Look, I know you will get a lot of rage mail, but just think about it.. IF IT WORKS, DON'T FIX OR CHANGE IT. IMPROVE IT
Change the icons, that is fine, the Heartbeat sound effects of pressing the dscan is ok (just) , but please just bear with us, your customers who invest a lot of time playing your great game and streamline it rather than changing it into a impractical mess, especially for WH-space.
|
Rivr Luzade
Kenshin. DARKNESS.
2965
|
Posted - 2017.03.14 21:24:59 -
[55] - Quote
Why can't I instantly recall my probes after I launched them? This is possible in the old scanning system. In the new scanning system, I get a warning message telling me "Probes are at an unsafe incoming trajectory. 2000 meters needed for safe recovery". What kind of rubbish is this?
UI Improvement Collective
My ridicule, heavy criticism and general pale outlook about your or CCP's ideas is nothing but an encouragement to prove me wrong. Give it a try.
|
Moozh Vozmozhno
Operation WormBear Absence of Light
0
|
Posted - 2017.03.14 21:28:24 -
[56] - Quote
The directional scanner/probe scanner filters have hardcoded hotkeys to the number keys (1 through 0). They also do not respect the input focus, so if I press the 1 key because I've bound it to a module, it toggles both a probe scanner and a d-scan filter on or off.
This was a annoyance before the patch, now pretty much unplayable for anyone who binds the number keys to some other purpose.
Please make the d-scan and probe scanner filter hotkeys rebindable or unbindable! |
Tequila Sunnrise
SniggWaffe WAFFLES.
1
|
Posted - 2017.03.14 21:30:57 -
[57] - Quote
I believe there is now a problem with the repair facilities in the Upwell Structures. It works for assembled ships, but you can't seem to repair modules or any item located in the hanger bay or the cargo hold. Assume this is a bug that needs fixing as that is different from the main-line stations.
posted this in general feedback too, but this is probably the right forum location. |
Tequila Sunnrise
SniggWaffe WAFFLES.
1
|
Posted - 2017.03.14 21:59:26 -
[58] - Quote
One more thing...
I know it is great to have different shortcuts for fighters and drones but for the ones that are identical in command it makes little sense.
To be specific: you should be able to have the same shortcut for "launch drones" and "launch fighters" because you will never have both at the same time.
Suggest you merge the shortcuts for the items that are identical. |
Grookshank
Jump Drive Appreciation Society Jump Drive Appreciation Alliance
130
|
Posted - 2017.03.14 22:13:56 -
[59] - Quote
Is there a chance to get these huge pop-ups out of the way in the probe and dscan window? They often block functions. The only way I see now is putting the global delay for pop-ups on the highest setting. |
Sha'Uri Dark
Suspicious Activity Stranger Danger.
21
|
Posted - 2017.03.14 22:21:43 -
[60] - Quote
Arias Seven Seven wrote:I always love it when a patch needs patching or is so bad it just screws a whole game up. Congrats Devs. I say this not based soley on comments above, but also because I can't see anything but black on my screen whether in station or out. Yep, flying blind means unable to play the game. Nice patch.
I have this same issue on TQ and had it on SISI as well https://forums.eveonline.com/default.aspx?g=posts&m=6872299#post6872299 |
|
|
|
|
Pages: 1 [2] 3 4 5 6 :: one page |
First page | Previous page | Next page | Last page |