Pages: 1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 15 16 17 18 .. 18 :: one page |
|
Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Sable Blitzmann
Dirt 'n' Glitter Local Is Primary
181
|
Posted - 2016.05.06 01:08:46 -
[121] - Quote
Khan Wrenth wrote:Question - while building ships, I can't find a stat listed for how long I can overheat. Am I bad at PYFA, or is simply a feature I'll keep EFT around for?
Pyfa does not have this feature, and to be honest I'm not sure how EFT calculate it's value considering heat damage is chance based |
Khan Wrenth
Ore Oppression Prevention and Salvation
590
|
Posted - 2016.05.06 11:23:51 -
[122] - Quote
Sable Blitzmann wrote:Khan Wrenth wrote:Question - while building ships, I can't find a stat listed for how long I can overheat. Am I bad at PYFA, or is simply a feature I'll keep EFT around for? Pyfa does not have this feature, and to be honest I'm not sure how EFT calculate it's value considering heat damage is chance based
Okay, thank you for the reply! And doubly thank-you for maintaining PYFA, I love it and use it extensively! :)
Let's discuss overhauling the way we get intel in EvE.
|
Sable Blitzmann
Dirt 'n' Glitter Local Is Primary
182
|
Posted - 2016.05.08 17:10:30 -
[123] - Quote
For those having crashes, please read this:
https://github.com/pyfa-org/Pyfa/issues/598#issuecomment-217732417 |
Byggare BoBson
Revenue Builders
1
|
Posted - 2016.05.08 17:39:29 -
[124] - Quote
Hi
I recently started using Pyfa as EFT is not yet updated.
I first installed 1.21 and then later 1.21.1 when it was released.
I found the reddit page with the Damage Pattern stuff so I imported that from clipboard. No problem thus far. I then imported another profile. Still no problem.
But instead of replacing the one I had it added to the list. So I started removing rows from the first profile. Midway through it "stuck" and I couldnt remove any.
I closed pyfa en reopened and since then I havnt been able to open the Damage Pattern window at all. Shortcut Ctrl + D doesnt work either.
Ive tried to uninstall and install a fresh. Didnt help (APIs and stuff was still saved)
I uninstalled it again and ran CCleaner to clear regedit aswell. Installed a new, and APIs etc was still there.
I assume something went really bad and since I dont seem to be able to clear some savefiles or cache it seems like im not going to be able to use Pyfa. Damage pattern is very important to me so thats a must.
Is there anyway to solve this? |
Sable Blitzmann
Dirt 'n' Glitter Local Is Primary
182
|
Posted - 2016.05.09 01:22:38 -
[125] - Quote
Byggare BoBson wrote:Hi
I recently started using Pyfa as EFT is not yet updated.
I first installed 1.21 and then later 1.21.1 when it was released.
I found the reddit page with the Damage Pattern stuff so I imported that from clipboard. No problem thus far. I then imported another profile. Still no problem.
But instead of replacing the one I had it added to the list. So I started removing rows from the first profile. Midway through it "stuck" and I couldnt remove any.
I closed pyfa en reopened and since then I havnt been able to open the Damage Pattern window at all. Shortcut Ctrl + D doesnt work either.
Ive tried to uninstall and install a fresh. Didnt help (APIs and stuff was still saved)
I uninstalled it again and ran CCleaner to clear regedit aswell. Installed a new, and APIs etc was still there.
I assume something went really bad and since I dont seem to be able to clear some savefiles or cache it seems like im not going to be able to use Pyfa. Damage pattern is very important to me so thats a must.
Is there anyway to solve this?
I would recommend sending me you %userprofile%\.pyfa\saveddata.db file so that I can look at what exactly happened with the damage patterns to prevent it in the future. My email is listed in the README that ships with pyfa, and is also listed on our github repo.
As for the issue, once you send me the database, I can fix it and send it back, or you could just delete that file and start fresh (will delete any saved fittings). |
Byggare BoBson
Revenue Builders
1
|
Posted - 2016.05.09 17:33:39 -
[126] - Quote
Sable Blitzmann wrote:Byggare BoBson wrote:Hi
I recently started using Pyfa as EFT is not yet updated.
I first installed 1.21 and then later 1.21.1 when it was released.
I found the reddit page with the Damage Pattern stuff so I imported that from clipboard. No problem thus far. I then imported another profile. Still no problem.
But instead of replacing the one I had it added to the list. So I started removing rows from the first profile. Midway through it "stuck" and I couldnt remove any.
I closed pyfa en reopened and since then I havnt been able to open the Damage Pattern window at all. Shortcut Ctrl + D doesnt work either.
Ive tried to uninstall and install a fresh. Didnt help (APIs and stuff was still saved)
I uninstalled it again and ran CCleaner to clear regedit aswell. Installed a new, and APIs etc was still there.
I assume something went really bad and since I dont seem to be able to clear some savefiles or cache it seems like im not going to be able to use Pyfa. Damage pattern is very important to me so thats a must.
Is there anyway to solve this? I would recommend sending me you %userprofile%\.pyfa\saveddata.db file so that I can look at what exactly happened with the damage patterns to prevent it in the future. My email is listed in the README that ships with pyfa, and is also listed on our github repo. As for the issue, once you send me the database, I can fix it and send it back, or you could just delete that file and start fresh (will delete any saved fittings).
Removing the saveddata file worked fine! I saved the fits that I had, not many since Ive only used it for a few days. I could have mailed you the file but since I dont know what information that file holds I dare not. This is eve after all :P
But problem is solved! Thanks!
Maybe the pattern thing crashed when I very rapidly deleted profiles one by one. Something maybe broke in the savefile?
Thanks! |
Moriar theChosen
Blue Republic RvB - BLUE Republic
3
|
Posted - 2016.05.09 23:58:44 -
[127] - Quote
Ahoy,
I'm using pyfa, and I don't understand the two lines for recharge rates. Could someone point me to a description of the recharge rates panel.
Maybe I'm not an expert on how active tanks work, but why would I need more than one line to show how much hp/s is being regenerated in an active armor tank, for example? |
Idame Isqua
Caldari Colonial Defense Ministry Templis CALSF
30
|
Posted - 2016.05.10 11:04:19 -
[128] - Quote
From previous locked topic I didn't reply too "1) There should only be .pyfa in your user folder. This is the pyfa user directory for config / personal settings / fit database. I am not sure why you have 3, unless they are unrelated to pyfa (I know many programs used the ~/.dir convention)
2) To update: you can extract the zip somewhere (you should be able to re-write the previous location you used, unless you're upgrading from a very old version in which case best to delete old one). OR the easy way and use the .exe installer - this will install pyfa to a path you choose, and when you run the updated installer it will overwrite for you. This is the preferred method, as we can add code to the installer in the event that directory layout changes which might not be compatible with previous versions
3) Overheat timeres. It's been discussed before https://forums.eveonline.com/default.aspx?g=posts&m=6359763#post6359763 https://github.com/pyfa-org/Pyfa/issues/445 tl;dr this would be a very big project for very small benefit IMO (considering heat is based off chance and there's not way to predict it). I am not convinced EFT is doing it right so this is something where I would say just because EFT has it doesn't mean it's needed / useful. I'm open to thoughts though, feel free to provide a algorithm that might work =)
4) Ammo timers, can you be more specific?
5) DPS graphing. Yes, I know it sucks. This has been known for many years. No one wants to touch it though. >_>
6) Ah, the LP Store. I want to get it back up and running eventually, but I've had a lot on my plate recently. That and EMDR has died off (or will be) so I'd have to re-write the price caching backend of it. Not only that, but the LP Store data itself is probably very stale and I don't have the energy to keep it updated - it was very manual process of flying to each store and manually confirming if they were accurate. **** that. So yeah, I want to, but it's not as easy and simply turning it back on ;)"
Weird pretty sure I unzipped into the install location (I did this for a few updates and still lost my characters fitting. I'm just using the .exe now but will try the zip again for the next update. Ammo timers, EFT tells me how long I can shoot for with 100 rounds of ammo, its kinda important as (also with cap charges) I need to know how long I can shoot for (carry a minimal amount of ammo to save isk/still be effective). Yea IDK whats happening with offline market alot of stuffs broken, but you LP site was the best! |
Moac Tor
Cyber Core Stain Confederation
520
|
Posted - 2016.05.11 23:43:48 -
[129] - Quote
Thanks for keeping pyfa updated. The new capital aspects work pretty nicely considering how quickly you managed to get it sorted.
Modulated ECM Effects
An Alternative to Skill Trading
|
Luscius Uta
Anomalous Existence Low-Class
213
|
Posted - 2016.05.13 13:14:59 -
[130] - Quote
I imported my fittings from EFT to pyfa two times in hopes pyfa will update only those fittings that have been changed or have been added after the first import but, alas, now my every fit is duplicated. Where are my fittings stored so I can delete them and then perform another import?
Workarounds are not bugfixes.
|
|
Sable Blitzmann
Dirt 'n' Glitter Local Is Primary
182
|
Posted - 2016.05.13 22:46:21 -
[131] - Quote
Luscius Uta wrote:I imported my fittings from EFT to pyfa two times in hopes pyfa will update only those fittings that have been changed or have been added after the first import but, alas, now my every fit is duplicated. Where are my fittings stored so I can delete them and then perform another import?
%userdata%/.pyfa/saveddata.db is the database file. Deleting that will delete everything.
|
Baku Saissore
I Hunt U
6
|
Posted - 2016.05.15 03:28:53 -
[132] - Quote
Hi
I got Pyfa recently though all seems to work and the version is correct, i cant bring up citadels. what am i doing wrong? |
Sable Blitzmann
Dirt 'n' Glitter Local Is Primary
182
|
Posted - 2016.05.15 03:40:10 -
[133] - Quote
Baku Saissore wrote:Hi I got Pyfa recently though all seems to work and the version is correct, i cant bring up citadels. what am i doing wrong?
Citadel fitting is not currently supported. It is a planned feature, though no ETA is available. https://github.com/pyfa-org/Pyfa/issues/540 |
Baku Saissore
I Hunt U
6
|
Posted - 2016.05.15 03:43:15 -
[134] - Quote
I see!! thx |
Soel Reit
Dambusters 617 Sq
0
|
Posted - 2016.05.15 09:48:26 -
[135] - Quote
Found an error with "Heavy Stasis Grappler" when fitted to a carrier about "activation cost". on a carrier "-188k GJ" on battleships "-1.5 GJ"
|
Sable Blitzmann
Sebiestor Tribe Minmatar Republic
182
|
Posted - 2016.05.15 15:16:31 -
[136] - Quote
Soel Reit wrote:Found an error with "Heavy Stasis Grappler" when fitted to a carrier about "activation cost". on a carrier "-188k GJ" on battleships "-1.5 GJ"
You have an NSA active. One of it's effects is to increase the activation cost of EWAR module so that they cannot be powered on. |
Soel Reit
Dambusters 617 Sq
0
|
Posted - 2016.05.15 16:24:20 -
[137] - Quote
Sable Blitzmann wrote:Soel Reit wrote:Found an error with "Heavy Stasis Grappler" when fitted to a carrier about "activation cost". on a carrier "-188k GJ" on battleships "-1.5 GJ" You have an NSA active. One of it's effects is to increase the activation cost of EWAR module so that they cannot be powered on.
ty, didn't know about it! |
Dallenn
V0LTA WE FORM V0LTA
0
|
Posted - 2016.05.21 22:49:15 -
[138] - Quote
To use on Ubuntu, had to:
sudo apt-get install python-wxgtk2.8 sudo apt-get install python-sqlalchemy sudo apt-get install python-dateutil sudo apt-get install python-requests |
Dallenn
V0LTA WE FORM V0LTA
0
|
Posted - 2016.05.21 23:12:55 -
[139] - Quote
Having some issue when creating and trying to submit a name for a new character:
pyfa/gui/characterEditor.py", line 47, in Validate elif text in [x.name for x in profileEditor.entityEditor.choices]: AttributeError: 'CharacterEntityEditor' object has no attribute 'entityEditor' |
Soel Reit
Dambusters 617 Sq
2
|
Posted - 2016.05.22 13:10:41 -
[140] - Quote
mmmm another problem: lock range of carriers... in the ship's attribute is correct when you go and fit the hull it display 300 km in "targeting and misc" |
|
Sable Blitzmann
Sebiestor Tribe Minmatar Republic
182
|
Posted - 2016.05.22 19:31:28 -
[141] - Quote
Dallenn wrote:Having some issue when creating and trying to submit a name for a new character: pyfa/gui/characterEditor.py", line 47, in Validate elif text in [x.name for x in profileEditor.entityEditor.choices]: AttributeError: 'CharacterEntityEditor' object has no attribute 'entityEditor'
Can you be exact in your reproduction steps? Did you simply open the character editor and hit the create button, or did you go to another tab within the character editor, etc? I cannot reproduce. Make sure you're using the latest version. |
K950
EVE University Ivy League
3
|
Posted - 2016.05.23 14:38:37 -
[142] - Quote
3 things. Four things technically.
1) I've migrated over to Pyfa. I do however use EFT on occasion for things Pyfa does not provide.
2) http://i.imgur.com/7yiUyLZ.jpg
Can you make it so capacitor rechargers, control circuits, semiconductor memory cells, cap batteries and stuff like that provides a numerical value (like EFT on the left) for how much + to capacitor I'm getting per module? I typically use that for finding out which rigs/modules to use on fits that require capacitor stability (such as that Heron fit for Sleeper Caches).
3) I have on multiple occasions had moments where Pyfa stops responding to right-clicks. Usually after I've had the program open for awhile and am getting busy. I have to restart the program. Can't right click on a module or anywhere in the program.
4) Is it possible to make it so you can drag a module from the module list on the left (say when you chose View Market Group and you're picking things from that box on the lower left) and replace something already fitted? Drag & replace? EFT lets you do that, Pyfa does not.
Good work so far! Pyfa is a little better for EFT for doing things like damage profiles (ghost sites), hull tank principles and stuff like that.
can we have pre-formed starting character/all level 3/all level 4 skill profiles brought in in the next release? =P |
Lothian Scykle
Licence To Kill Mercenary Coalition
8
|
Posted - 2016.05.23 20:20:52 -
[143] - Quote
+1 to the right-click not responding after a while of use (on a Mac). It's happened to me a few times, though I cannot remember what common tasks I had done prior that might be causing it. I'll pay closer attention in future.
I don't know if this has been mentioned yet, but when fitting the new Ancillary Remote Repair modules to a logistics cruiser, the full PG amount is being used in the fitting window rather than taking the hull's PG reduction into account. For example, adding a Large Ancillary Remote Armor Repairer to an Oneiros uses 600 pg, whereas adding a Large Solace Scoped Remote Armor Repairer (with the same 600pg requirement) only uses 210 in the fitting window.
As always, thanks for keeping this software going! It is a fantastic tool. |
mack trucker
SniggWaffe WAFFLES.
1
|
Posted - 2016.05.23 22:05:27 -
[144] - Quote
I have to admit my laziness in that I didn't read all of the comments.
Is there an offline installer for this Citadel release because for some reason, I can't download it? I haven't had any problems downloading before and nothing has changed on my PC to cause it to not download.
I reallllly don't want to go back to EFT. LOL! |
Sable Blitzmann
Sebiestor Tribe Minmatar Republic
182
|
Posted - 2016.05.23 23:51:43 -
[145] - Quote
K950 wrote:3 things. Four things technically. 1) I've migrated over to Pyfa. I do however use EFT on occasion for things Pyfa does not provide. 2) http://i.imgur.com/7yiUyLZ.jpg Can you make it so capacitor rechargers, control circuits, semiconductor memory cells, cap batteries and stuff like that provides a numerical value (like EFT on the left) for how much + to capacitor I'm getting per module? I typically use that for finding out which rigs/modules to use on fits that require capacitor stability (such as that Heron fit for Sleeper Caches). 3) I have on multiple occasions had moments where Pyfa stops responding to right-clicks. Usually after I've had the program open for awhile and am getting busy. I have to restart the program. Can't right click on a module or anywhere in the program. 4) Is it possible to make it so you can drag a module from the module list on the left (say when you chose View Market Group and you're picking things from that box on the lower left) and replace something already fitted? Drag & replace? EFT lets you do that, Pyfa does not. Good work so far! Pyfa is a little better for EFT for doing things like damage profiles (ghost sites), hull tank principles and stuff like that. can we have pre-formed starting character/all level 3/all level 4 skill profiles brought in in the next release? =P EDIT: seems like tracking diagnostic subroutines do not affect guidance disruptors?
1) Okay
2) I can definitely look into this.
3) Already fixed, I'm going to try to make a release tonight with this fix. https://github.com/pyfa-org/Pyfa/issues/589
4) It's been mentioned before, just haven't gotten around to it. On the list of things to do. =)
5) Setting a default level for a character was in the works but I dropped working on it for a few reasons. It's still in the back log, and when time allows will hopefully be implemented. For now, probably best to set an all 3/4 char in EVEMon and then import the after plan export into pyfa.
6) That rig does affect Guidance Disruptors. You can see it in the Disruptors Affected By tab in it's stats window. If not, throw a github issue up with screenshots and details and I can take a look. |
Sable Blitzmann
Sebiestor Tribe Minmatar Republic
182
|
Posted - 2016.05.23 23:56:10 -
[146] - Quote
mack trucker wrote:I have to admit my laziness in that I didn't read all of the comments.
Is there an offline installer for this Citadel release because for some reason, I can't download it? I haven't had any problems downloading before and nothing has changed on my PC to cause it to not download.
I reallllly don't want to go back to EFT. LOL!
I'm not sure what you mean by an offline installer. All you have to do is download either the .exe installer or the .zip archive from github (check first post). The installation doesn't require internet connectivity other than the initial download |
mack trucker
SniggWaffe WAFFLES.
1
|
Posted - 2016.05.25 22:22:53 -
[147] - Quote
Sable Blitzmann wrote:mack trucker wrote:I have to admit my laziness in that I didn't read all of the comments.
Is there an offline installer for this Citadel release because for some reason, I can't download it? I haven't had any problems downloading before and nothing has changed on my PC to cause it to not download.
I reallllly don't want to go back to EFT. LOL! I'm not sure what you mean by an offline installer. All you have to do is download either the .exe installer or the .zip archive from github (check first post). The installation doesn't require internet connectivity other than the initial download
My terminology is probably awful. I apologize. When I go to the Github site from the first post here and click the download link, nothing happens. I've not seen a *.zip link but that would be grand if I had one. I'm assuming the one I'm clicking is an executable link instead of a downloadable zip?
*Edit for recanting. I see the updated version now. Thank you so much for your reply. :) |
Aya Audeles
C20H25N3O Co.
0
|
Posted - 2016.05.27 11:04:01 -
[148] - Quote
Hello.
First of all I want thank you for such a great soft! And now I have a question. Is there an option that will keep me logged all the time? Because at the moment I had to log through web each time I lunch PYFA. Also character implants tab doesn't show my implants it may be bug or I don't know how make this work.
(Pardon my English)
Pardon my English.
|
Garsean Halmof
Center for Advanced Studies Gallente Federation
0
|
Posted - 2016.05.29 17:19:47 -
[149] - Quote
Ok. I don't know if I'm blind as a bat or what, but where are the download links? I went to the 'Releases' page and nothing there besides current release version and fixed bugs info.
Fyi - I don't use github for anything besides downloading this. |
Captain Stupid
Ciggy Butt Brains. ChaosTheory.
182
|
Posted - 2016.05.31 20:31:58 -
[150] - Quote
Same issue here. Click link, get nothing. Literally nothing happens. |
|
|
|
|
Pages: 1 2 3 4 [5] 6 7 8 9 10 11 12 13 14 15 16 17 18 .. 18 :: one page |
First page | Previous page | Next page | Last page |